Sinktops & Drainers
A range of sinktops in various sizes and configurations. Fully moulded sinktops have integral sinks and drainers cast as one piece, or can be fabricated to a non-standard size.
Moulded in one piece.
Integral sinks and drainers cast as a single unit leave no joints to trap contamination, or fabricated where a moulding doesn't suit.
Moulded Single Drainer
One-piece sinktop with an integral sink and single drainer — no joints to trap contamination.
Moulded Double Drainer
Integral sink with drainers to both sides, moulded as a single seamless unit.
Fabricated Sinktops
Built to suit non-standard sizes or configurations where a moulding isn’t available.
Drop-in & Drop-on
Sink-and-drainer units designed to drop into or onto an existing worktop.
Material specification.
Mechanical properties
| Tensile strength | 85 N/mm² |
|---|---|
| Tensile modulus | 10,500 N/mm² |
| Elongation at break | 0.8% |
| Flexural strength | 112 N/mm² |
| Flexural modulus | 10,000 N/mm² |
| Compressive strength | 190 N/mm² |
| Linear thermal expansion | 34 × 10⁻⁶ /°C |
| Water absorption (24h @ 23°C) | 5–10 mg · ISO 62 |
Thermal & fire
| Thermal shock | 2000 cycles · no effect |
|---|---|
| Smoke emission | Low · BS 6853:1999 |
| Flammability | Class 0 |
| Thermal decomposition | 350°C |
| Glass transition (Tg) | 120–130°C |
| Radioactive decontamination | 5598 · "Excellent" |
Chemical resistance
Tested to BS EN 438-2:1991 (24-hour spot test). Unaffected by the majority of common laboratory reagents — including acetone, alcohols, and hydrochloric and sulphuric acids. A small number of aggressive reagents cause slight bleaching or surface attack (e.g. dichloromethane, hydrofluoric acid, fuming nitric acid). Full classified spot-test matrix available on request — ref. SIM-CR-24.
Five standard colours.
// Colours shown are a guide only and cannot be guaranteed to match supplied components.
Need a sinktop to a specification?
Send your sizes and configuration and we'll quote.