Moulded single drainer sinktops
A worksurface, sink and sloping drainer moulded as a single seamless section, cut to the length you order.
Sinktops from this range incorporate a ribbed drainer area sloping to an integrally moulded sink bowl. The units are cast oversize and then cut to the required size and configuration, from a minimum of 900 x 600 mm up to a maximum of 1500 x 900 mm and any size in between, then fitted with edging from the Simmons range as required.
Sinktops can be fitted directly onto steel supports or cabinets; no additional support is needed. Two units can be combined into a double bowl, double drainer sinktop, with a central joint machined ready to be jointed on site, edging all round the assembly, and all jointing materials supplied.
When ordering, state the overall size, left or right hand bowl, the preferred position of the sink within the unit, and any tap holes required.
Single drainer sizes.
Shown here at the standard width of 750 mm. Single drainers can be made at any width from 600 to 850 mm at no additional cost. RHB is a right-hand bowl and LHB a left-hand bowl, looking at the unit from the front; the model for each length is the same for both hands.
Revit family: Single drainer sinktops (RFA, 424 KB)
| Ref. | Length | Width | Bowl size | Waste location | Files |
|---|---|---|---|---|---|
| SD900-RHB | 900 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
| SD900-LHB | 900 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
| SD1000-RHB | 901 to 1000 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
| SD1000-LHB | 901 to 1000 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
| SD1200-RHB | 1001 to 1200 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
| SD1200-LHB | 1001 to 1200 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
| SD1400-RHB | 1201 to 1400 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
| SD1400-LHB | 1201 to 1400 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
| SD1500-RHB | 1401 to 1500 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
| SD1500-LHB | 1401 to 1500 mm | 600 to 850 mm | 400 x 400 x 300 mm | Next to drainer | IFC |
Fabricated single drainers.
Where the moulded range does not fit, a single drainer sinktop can be fabricated from 15 mm sheet with a sink from the standard range and a moulded drainer, a drainer board or machined drainer grooves.
Description to be confirmed with Simmons
Request a quote for a single drainer sinktop.
Send your drawings or requirements and our team will come back with a quotation. Need to see the finish first? Request a free sample.